Tips For Removing Linoleum

When it comes time to get new flooring you can save money by removing the old flooring yourself but if you have old linoleum on your floors you might be in for quite a challenge. Depending on how old the linoleum is and the type of adhesive that was used it can be extremely difficult to get up. 

First of all, it's unlikely that you'll be able to just remove the linoleum and adhesive all at once. The surface under the linoleum and the damage you might cause it needs to be considered - especially if that surface is wood. Concrete floors can take a lot more in the way of rough treatment. The type of scraper you use has a lot to do with your success as well as the damage to the floor underneath. Many people use paint scrapers but those with a razor blade are usually more efficient. Be prepared to break some blades it if the adhesive is hard, and you're working on concrete.

Try cutting the linoleum into strips or sections instead of removing the whole chunk at once. This will make it easier to get an edge to pry up. Of course, the linoleum probably won't come up in nice neat sections so be prepared to deal with a lot of left over backing and glue that is still attached to your floor.

One way to deal with those remnants that just won't come up is to apply some kind of solvent or remover. A popular brand is Krud Kutter, which appears to work very well from the customer feedback comments. Follow directions on the label of whatever product you employ, and wear gloves to protect your hands. Do a small section at a time, and then move to the next one.

Another technique is to use boiling water and pour it directly on the backing and adhesive. Let it soak and then scrape up. If you don't want to use water, you can try to heat up the glue with a hair dryer or heat gun. Pick a very inconspicuous area, such as behind a door, to try it. Heat the adhesive with the hair dryer and scrape it up with a straight-blade scraper (like a stiff putty knife with a beveled edge). Move the scraper in the direction of the grain of the wood if you are uncovering a hardwood floor. Have a pan or some other container handy to drop the scrapings into - one that is unlikely to either melt or ignite when coming in contact with hot materials. Be very careful if you are using a heat gun as this can easily damage the floor underneath if it is wood.

If worse comes to worse and you are left with some stubborn adhesive on the floors, it might be time to sand. Of course, if your floors are wood and you plan to refinish them you would need to sand anyway, but during this step you must be careful not to damage the particular area by keeping the sander on it for too long.

Once you finally get the linoleum and all traces of adhesive up, you are ready to seal the floor as recommended for the type of flooring and apply the new floor as recommended!

Author Bio
Lee Dobbins writes for A Kitchen Decorating Idea where you can find more tips on kitchen remodeling and decorating on a budget.

Article Source: http://www.ArticleGeek.com - Free Website Content

Controlling Dust Mites in Your Home By: Heather Peters

My guess is that you don't know much about dust mites except they are small, unseen creatures that disgust you. Perhaps someone in your household is allergic to them. Here is some background information on dust mites and how you can work to control them in your house.

Dust mites don't live in your air ducts, although most people tend to focus there when attempting to remove them. They live in soft places, prefer higher humidity and release a protein which causes an allergic reaction for many people. If you don't have any reactions to dust mite proteins then reducing your exposure may not be a priority for you but these basic treatment steps should still be taken to reduce their presence in your home and affect on your life. If you need motivation to do some of these steps you can see pictures of dust mites by doing this google image search. They're gross enough to scare anyone into a rapid cleaning spree. 

1. Dust and vacuum your house on a regular basis. The more dirt you have, the more dust mites you have.

2. Use a dehumidifier to reduce the humidity levels in your home as they prefer high humid environments (anything over 70%)

3. Wash your family's bedding in hot water at least twice monthly, preferably weekly.

4. Get machine washable plush toys if you have children, the fabric harbors dust mites.


If you have someone allergic to dust mites these are more intense combat steps to take:

1. Do your best to eliminate all cloth surfaces as they tend to harbor these creatures

2. Replace your carpets with wood or laminate flooring

3. Remove fabric covered furniture and switch to wood or plastic pieces

4. Wrap your mattress, pillows and box springs in zippered covers that area dust proof and allergen proof. 

You probably won't completely eliminate dust mites, but you can go a long way toward reducing their numbers by maintaining a clean healthy living environment. Your family will thank you for it.

Author Bio
dustmites.topicreviews.com seeks to provide you with information about methods to control, reduce and eliminate dust mite allergens in your home while providing background information on these pests.

Article Source: http://www.ArticleGeek.com - Free Website Content

Make Your Kitchen Cabinets Look Great for Less

Kitchen cabinets are one of the most prominent features in your kitchen. If your cabinets are looking worn or drab, it affects the whole look and feel of your kitchen. 

The good news is there are several options available to you that can easily update your kitchen with a modern look. Some options are expensive and others are more economical.

If you like the cabinet layout and the cabinets are in good condition, refacing or resurfacing your kitchen cabinets may be a good choice for you.
Refacing or resurfacing consists of replacing the cabinet doors and drawer fronts with new ones and then treating the cabinet frame with a matching veneer. There are many types of woods and plastics available for this, so your options are virtually unlimited. 

To get the best results, it's always best to hire a professional to do this work. It can be quite expensive, though, ranging anywhere from $3500 to over $10,000. The work usually takes 2-4 days, depending on how many cabinets and drawers are involved.

If your cabinets are weak or damaged or you just want to change their design, replacing them entirely is another option. Replacement cabinets may not cost much more than refacing/resurfacing them, either. Brand new cabinets can add more usefulness to your kitchen and increase the value of your home, as well
If resurfacing or replacement of your kitchen cabinets doesn't fit your budget, there are much less expensive alternatives. 

My first choice for renewing the look of kitchen cabinets is paint. What a difference a coat or paint can make!

For a retro look you can use splashy colors such as pink, turquoise or orange. Be brave and paint designs on the cabinets or use stencils or a faux finish. Add some matching hardware and you've got new cabinets for less than $300!
Another idea is to permanently remove all the cabinet doors. This wouldn't be appropriate or even functional for every style of kitchen. It might work well for a cottage kitchen design or even an antique Victorian design. You could line the shelves with lace or doilies that flap over the edge to add to the look. 
An alternative to completely removing the cabinet doors is to replace them with old windows that are the right size. You could also create new doors from different types of materials such as bamboo or fabric.

Another idea for resurfacing kitchen cabinets is to wallpaper them or apply contact paper. A plain pattern is best and, of course, make sure it is washable. You don't necessarily need to cover the whole surface. You could cut out different shapes or patterns and apply them to the cabinet surface. This would be a good short-term solution to freshening up your kitchen.
So there you have it. There are many ways to make your kitchen cabinets look great without breaking the bank!
Author BioLee Dobbins writes about  Kitchen Decorating for every budget.  Visit www.a-kitchen-decorating-idea.com for more ideas on how to revitalize your kitchen cabinets.
Article Source: http://www.ArticleGeek.com - Free Website Content

Acne - A Clean Face - Step 1 in a 12 Step Program

Acne - A Clean Face - Step 1 in a 12 Step Program
By: Rudy Silva
For those that need more than a special cream like Scotty's Face Cream, then you need to work harder to get rid of acne.  Since acne is a condition that occurs from within your body and exhibits on the outside of your body, you need to,


Attack acne from inside your body
Attack acne from outside your body


If your acne is not to severe, all you might need is a good cream and need only to follow a few steps in my 12 step program to get you past the periods where acne is active.

If your acne is more severe, than you may have to follow my 12-step program, since acne is an expression of your whole body system and is a reflection of what is going on inside your mind, cell structure and internal organs.

Acne is an excessive toxic condition within your body, which the internal elimination organs are unable to eliminate.  So your toxins are moved into your blood and excreted through your skin.  It is an automatic survival mechanism your body initiates in an effort to protect the insides of your body - cells, liquid, blood, organs, and tissues.

There are 12 areas that you need to look at,


Keep your face clean
Using Scotty's acne face cream or your favorite face cream
Relive your constipation and the tree day liquid fast
Making changes to your diet
Get plenty of sun, air, and water
Vitamins you need to be taking
Minerals you should be taking
Special supplements to take
Herbal mixture to use or drink
Special detoxifying drinks or supplements to take
Brushing your skin
Change your attitude


Step 1:  Keeping your face clean
If you use face cosmetics, you need to stop.  Some cosmetics irritate the skin and can cause acne by plugging up your pores on your face.  The cosmetics chemicals that can cause you the most skin and pore irritation and inflammation are:


mineral oil
lanolin
parabens
propylene glycol


Look at the label of the cosmetics you use.  You will find that many cosmetics, soaps, and sunscreens contain these chemicals.

Find a water base make up, not an oil base.  Find one that does not irritate your face and use it sparingly

When you wash your face don't use any commercial soaps since they are filled with chemicals that will irritate and worsen your acne condition. And don't excessive wash your face as this will dry your skin of the natural protective oil.  Also, don't keep touching your face since you spread or add bacteria to it.

To wash your face use only,


Castile hand or liquid soap
Pure glycerin hand soap


You can pat your face with a clean hot face towel to bring circulation to your face and to help open and move the toxic material, in the pimple, to the surface.  Do not scrub hard to burst a pimple but just scrub lightly to burst a pimple when it is ready to open.

Use the hot towel application only 2-3 times per week.

When a pimple is open do not continue to rub or scrub it.  In fact do not pick or scratch an open pimple since this could create other sores or leave scars that are difficult to remove. Just washing your face with clean soap will keep your face free of toxic matter.

Keep in mind, whatever you put on your skin will move into your skin and into your bloodstream.

 Most commercial creams, lotions, and soaps are filled with all kinds of chemicals that are toxic to your body.  By using them you are making your liver work harder.

During the day or at night avoid resting your cheeks or chin on your hand(s) or arm(s).  This can irritate your face and cause acne to breakout.  When you sleep, try to sleep on your back and not with your face or side of the face into your pillow.

There you have it.  Step 1, shows you how to keep your face clean to avoid getting acne or to help relieve acne.

Author Bio
Rudy Silva is a Natural Nutritionist.  Go here to get a free speical eReport called "How to Have A Blemish-Free, Super-Clean Smooth Face"  :  www.for--you.com/SkinCareTreatment

Article Source: http://www.ArticleGeek.com - Free Website Content

glass vases - html code

glass vases - html code

CLEAN CEILING FANS

WHY DO THIS?

Dirt, dust and debris get caught on your ceiling fan and then are dispersed throughout your home, causing aggravating allergies and leaving a layer of dust on your furniture. Every two months, take the time to clean your ceiling fan to avoid these problems.

what you'll need

• all-purpose cleaner
• canned air ($5 at your local hardware store)
• screwdriver
• soft cloth or baby wipe
• ladder

how to:

Safety Note: Cleaning your ceiling fans usually requires a ladder. Please use ladder safety precautions at all times.

1. 1
   Make sure your ceiling fan is turned off. A ceiling fan blade is dangerous when it’s moving and can cause serious injury. If you use an on/off switch to control your fan like a light, place a piece of tape on the switch to keep it off during the cleaning process.
2. 2
   Place a ladder directly under the ceiling fan and make sure it’s stable. Make sure someone is there to spot you for this cleaning task.
3. 3
   Once you’re near the fan, open the compartment that surrounds the motor. You may need a screwdriver to do this. Using your bottle of canned air, spray the motor to remove dust, dirt and other debris. Then, close the compartment.
4. 4
   Turn your fan until you can easily access a blade. Spray your all-purpose cleaner on a soft cloth, and wipe the top of the blade until you’ve thoroughly removed the dirt and dust. Repeat this step for each fan blade. Note: Avoid the fan's motor and always keep it dry. Any moisture on the motor could ruin the electrical components.
5. 5
   If your fan is connected to light fixtures, now would be a good time to clean those, too! Here’s how: Clean Glass Light Fixtures with Denture Tablets.
6. https://brightnest.com/todos/clean-ceiling-fans

CLEAN YOUR FLOOR FANS

WHY DO THIS?

Floor fans get a lot of use during the summer months, which means they fill up fast with dust and dirt. If your fan has developed a grunge look, it’s probably time for a clean. This is generally a quick task that leaves your air cleaner and your house cooler.

Difficulty: 

 

 

Time: 15 minutes

what you'll need

• screwdriver
• two soft rags
• a bucket of warm water
• liquid dish soap
• a towel

how to:

1. 1
   Turn off and unplug your fan. Never attempt to clean your fan while it’s still connected to a power source.
2. 2
   Remove the fan’s front grill by unscrewing it with your screwdriver. If your floor fan doesn’t have screws, there should be clips holding the front grill to the back grill that you can pop off with your fingers. If it’s unclear what to do, consult your owner’s manual for directions.
3. 3
   Some fans may have a blade cap, which is located in the center of the fan blade. Unscrew this until it is loose and then pull it off.
4. 4
   Slide the fan blade off the back grill. Again, consult your owner’s manual if you have any questions.
5. 5
   Optional: Remove the back grill from the base of the fan. Some fans have a back grill nut that needs to be unscrewed before you can do this.
6. 6
   You should now have three parts to clean: A front grill, the fan blades, and a back grill. If your fan has a lot of dust and debris built up, take a rag and remove as much as you can now, before you start rinsing with water.
7. 7
   Add about 1/2 teaspoon of dishwashing liquid into the bucket of warm water.
8. 8
   Dip a clean rag into the bucket of warm water and wipe down the fan blades and grills. If your fan has a lot of dirt, make sure you rinse the rag frequently to avoid just spreading dirt around. Note: Be careful not to get the fan motor wet while wiping down these areas. The mechanical parts can be damaged by water.
9. 9
   After you have rinsed all surfaces thoroughly, take a dry rag and wipe the surfaces down one last time to remove any leftover debris.
10. 10
    Lay the grills and fan blades on top of your towel to dry. Allow the pieces to completely dry before your reassemble the fan.
11. 11
    Stay cool, my friends.
12. https://brightnest.com/todos/clean-your-floor-fans